Effects of heat and pressure on hot-pressed geopolymer

Navid Ranjbar, Amin Kashefi, Guang Ye, Mehdi Mehrali

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Abstract

Hot-pressed geopolymers have been introduced as ultra-high early strength ceramic-like materials with an almost pore-less structure. This study investigates the combined effects of pressure and heat on geopolymerization kinetics, microstructure, physical properties, and mechanical performance of geopolymers. The results demonstrate that about 65% of the trapped air is easily removed from the fresh geopolymer matrix using an initial impact pressure. When the pre-compacted matrix is subjected to the hot-pressing, it is further densified in the range of 1–10% as a result of continuous free-water evaporation and compaction. This process not only reduces the size and volume of porosity but also changes the continuous pore network to a closed one. Besides, the increase in hot-pressing promotes higher geopolymer gel formation and accelerates the polycondensation which possesses relatively high mechanical strength up to 160 MPa immediately after the processing. Collectively, these results demonstrate that the hot-pressing technique is a promising processing route for designing geopolymer with a diverse range of mechanical properties in a short and fast manner.

Original languageEnglish
Article number117106
Number of pages8
JournalConstruction and Building Materials
Volume231
DOIs
Publication statusPublished - 2020

Keywords

  • Backscattered electron
  • Geopolymer
  • Hot-pressing
  • Pressure
  • Temperature
  • Ultra-high strength

Fingerprint Dive into the research topics of 'Effects of heat and pressure on hot-pressed geopolymer'. Together they form a unique fingerprint.

  • Cite this