TY - GEN
T1 - Experimental Investigation of the Signal Quality of One-way Scanning Laser Doppler Vibrometer on Different Materials
AU - Katta, Shashanka
AU - Zeng, Yuanchen
AU - Li, Zili
PY - 2025
Y1 - 2025
N2 - Vibrations of engineering structures can give insights into their dynamic properties and aid in assessing their health conditions and identifying damage. One-way scanning laser Doppler vibrometer (LDV) aims to scan structures along a certain path without stopping. The signal quality of one-way scanning LDV is affected by the surface characteristics of target structures. Different materials of engineering structures, such as steel, clay, and asphalt, exhibit different textures, roughness, and particle sizes. These differences can cause variations in backscattering and speckle patterns along the scanning path, affecting signal quality. This paper investigates how different materials and scanning speeds affect the signal quality of one-way scanning LDV through experiments. A rotating mirror directs the laser beam of an LDV to scan a vibrating beam with target surfaces made from clayey soil, sandy soil, steel, asphalt and wood at two different speeds: 0.6 ms-1 and 3 ms-1. Subsequently, a two-step despeckling algorithm involving moving root mean square-based thresholding and an Empirical Mode Decomposition-based filter is applied to separate out the noise from the signal. The results indicate that noise power is much higher and signal-to-noise ratio (SNR) is significantly lower for clayey soil, sandy soil, and asphalt compared to wood and steel.
AB - Vibrations of engineering structures can give insights into their dynamic properties and aid in assessing their health conditions and identifying damage. One-way scanning laser Doppler vibrometer (LDV) aims to scan structures along a certain path without stopping. The signal quality of one-way scanning LDV is affected by the surface characteristics of target structures. Different materials of engineering structures, such as steel, clay, and asphalt, exhibit different textures, roughness, and particle sizes. These differences can cause variations in backscattering and speckle patterns along the scanning path, affecting signal quality. This paper investigates how different materials and scanning speeds affect the signal quality of one-way scanning LDV through experiments. A rotating mirror directs the laser beam of an LDV to scan a vibrating beam with target surfaces made from clayey soil, sandy soil, steel, asphalt and wood at two different speeds: 0.6 ms-1 and 3 ms-1. Subsequently, a two-step despeckling algorithm involving moving root mean square-based thresholding and an Empirical Mode Decomposition-based filter is applied to separate out the noise from the signal. The results indicate that noise power is much higher and signal-to-noise ratio (SNR) is significantly lower for clayey soil, sandy soil, and asphalt compared to wood and steel.
KW - Empirical Mode Decomposition
KW - Laser Doppler vibrometer
KW - Noise power
KW - Signal-to-noise ratio
KW - Speckle noise
KW - Structural vibrations
UR - https://www.scopus.com/pages/publications/105018041511
U2 - 10.1007/978-3-031-96110-6_8
DO - 10.1007/978-3-031-96110-6_8
M3 - Conference contribution
AN - SCOPUS:105018041511
SN - 9783031961090
SN - 978-3-031-96112-0
T3 - Lecture Notes in Civil Engineering
SP - 105
EP - 115
BT - Experimental Vibration Analysis for Civil Engineering Structures
A2 - Cunha, Álvaro
A2 - Caetano, Elsa
PB - Springer Nature
T2 - 11th International Conference on Experimental Vibration Analysis for Civil Engineering Structures, EVACES 2025
Y2 - 2 July 2025 through 4 July 2025
ER -