Infrared polarization measurements and modeling applied to surface-laid antipersonnel landmines

F Cremer, W de Jong, K Schutte

    Research output: Contribution to journalArticleScientificpeer-review

    63 Citations (Scopus)

    Abstract

    Linear polarization of thermal infrared (TIR) radiation occurs when radiation is reflected or emitted from a smooth surface (such as the top of a landmine) and observed from a grazing angle. The background (soil and vegetation) is generally much rougher and therefore shows less pronounced linearly polarized radiation. This difference in polarization is utilized to enhance detection of landmines using TIR cameras. A setup has been constructed for the acquisition of polarized TIR images. This setup contains a polarization filter that rotates synchronously to the frame sync of the camera. Either a long wave infrared (LWIR) or a mid wave infrared (MWIR) camera can be mounted behind the rotating polarization filter. The synchronization allows a sequence of images to be taken with a predefined constant angle of rotation between the images. Using this image sequence, three independent Stokes images are calculated, consisting of the unpolarized radiance, the difference between vertically and horizontally polarized radiances, and the difference between the two diagonally polarized radiances. A model has been developed that describes the polarization due to reflection of and emission from a smooth surface. This model predicts the linear polarization for a landmine ``illuminated¿¿ by a source that is either hotter or cooler than the surface of the landmine. The measurement setup has been used to validate the model. The measurements agree well with the model predictions and can be used for estimating the real part of the refractive index of the rubber surface of the landmine. Besides the indoor measurement, outdoor measurements have also been performed. The results of these measurements show that under the given conditions the majority of landmines can be observed in the polarized radiance, whereas they are not clearly visible in the normal (unpolarized) radiance or the visual image. Subject terms: infrared polarization model; measurement setup; measurements; landmine detection.
    Original languageUndefined/Unknown
    Pages (from-to)1021-1032
    Number of pages12
    JournalOptical Engineering
    Volume41
    Issue number5
    Publication statusPublished - 2002

    Keywords

    • academic journal papers
    • ZX CWTS JFIS < 1.00

    Cite this