Investigation of dynamic wind loads on a long-span suspension bridge identified from measured acceleration data

W. Petersen, O. Øiseth, E. Lourens

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
39 Downloads (Pure)

Abstract

The traditional wind load assessment for long-span bridges relies on assumed models for the wind field and aerodynamic coefficients from wind tunnel tests, which usually introduce some uncertainties. Recent studies have shown that large deviations can exist between the predicted and observed wind-induced dynamic response of suspension bridges. In studies of the dynamical behavior of bridges, inverse force identification methods can therefore be an interesting tool in the assessment of possible uncertainties involved in the modeling of wind loads. This paper presents a novel case study of the identification of the dynamic wind loads on the 1310 ​m long Hardanger bridge, a suspension bridge equipped with a monitoring system for wind and vibrations. The modal wind loads are identified from acceleration data using an algorithm for model-based joint input and state estimation. Several data sets with different wind conditions are presented. The wind loads are studied in the time and frequency domains and are compared to the mean velocity and turbulence characteristics of the wind.

Original languageEnglish
Article number104045
Number of pages16
JournalJournal of Wind Engineering and Industrial Aerodynamics
Volume196
DOIs
Publication statusPublished - 2020

Keywords

  • Force identification
  • Structural monitoring
  • Suspension bridge
  • Wind loads

Fingerprint Dive into the research topics of 'Investigation of dynamic wind loads on a long-span suspension bridge identified from measured acceleration data'. Together they form a unique fingerprint.

  • Cite this