Abstract
The calibration of Angular Accelerometers requires a controlled test with a known acceleration profile. However, current turn-tables have been designed primarily for generating a constant rotational velocity. To generate a profile with varying angular acceleration we propose using constant rotational velocity on the two axes of a 2-axes motion simulator. The proposed sequence was developed to obtain the required rotational acceleration signal quality using only rotational velocity input. The identified pattern is applied to an envelope of test conditions, resulting in test matrix. This method provides an alternative means to generate inputs that can be used to calibrate angular accelerometers using calibration hardware that is not primarily designed to provide accurate acceleration inputs.
Original language | English |
---|---|
Title of host publication | AIAA Modeling and Simulation Technologies Conference |
Subtitle of host publication | San Diego, USA |
Place of Publication | Reston |
Publisher | American Institute of Aeronautics and Astronautics Inc. (AIAA) |
Number of pages | 11 |
ISBN (Electronic) | 978-1-62410-387-2 |
DOIs | |
Publication status | Published - 2016 |
Event | AIAA Modeling and Simulation Technologies Conference, 2016 - San Diego, United States Duration: 4 Jan 2016 → 8 Jan 2016 https://doi.org/10.2514/MMST16 |
Conference
Conference | AIAA Modeling and Simulation Technologies Conference, 2016 |
---|---|
Country/Territory | United States |
City | San Diego |
Period | 4/01/16 → 8/01/16 |
Internet address |