On-site condition monitoring of HV power cables up to 150kV

E Gulski; P Cichecki; JJ Smit; PP Seitz; B Quak; F de Vries

doi:10.1109/CMD.2008.4580503

On-site condition monitoring of HV power cables up to 150kV

E Gulski, P Cichecki, JJ Smit, PP Seitz, B Quak, F de Vries

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

6 Citations (Scopus)

Abstract

For advanced, non-destructive on-site condition monitoring of HV power cables up to 150 kV by partial discharge detection and dielectric losses measurement it is necessary to energize the disconnected cable system. One of the methods available for this purpose is based on applying damped AC voltages up to 150 kV. In this contribution, the use of modern technological solutions in power electronics and signal processing as well as in technical design and production methods will be discussed on the basis of ultra light system which is able to on-site service aged HV cables.

Original language	Undefined/Unknown
Title of host publication	Proceedings of 2008 International conference on condition monitoring and diagnosis CMD 2008
Editors	s.n.
Place of Publication	Piscataway
Publisher	IEEE Society
Pages	1199-1202
Number of pages	4
ISBN (Print)	978-1-4244-1621-9
DOIs	https://doi.org/10.1109/CMD.2008.4580503
Publication status	Published - 2008
Event	2008 International conference on condition monitoring and diagnosis, CMD 2008, Beijing China - Piscataway Duration: 21 Apr 2008 → 24 Apr 2008

Publication series

Name
Publisher	IEEE

Conference

Conference	2008 International conference on condition monitoring and diagnosis, CMD 2008, Beijing China
Period	21/04/08 → 24/04/08

Keywords

conference contrib. refereed
Conf.proc. > 3 pag

Access to Document

10.1109/CMD.2008.4580503

Cite this

@inproceedings{9a7324ded0b14c01ab45c8f5a6dc9d0b,

title = "On-site condition monitoring of HV power cables up to 150kV",

abstract = "For advanced, non-destructive on-site condition monitoring of HV power cables up to 150 kV by partial discharge detection and dielectric losses measurement it is necessary to energize the disconnected cable system. One of the methods available for this purpose is based on applying damped AC voltages up to 150 kV. In this contribution, the use of modern technological solutions in power electronics and signal processing as well as in technical design and production methods will be discussed on the basis of ultra light system which is able to on-site service aged HV cables.",

keywords = "conference contrib. refereed, Conf.proc. > 3 pag",

author = "E Gulski and P Cichecki and JJ Smit and PP Seitz and B Quak and {de Vries}, F",

year = "2008",

doi = "10.1109/CMD.2008.4580503",

language = "Undefined/Unknown",

isbn = "978-1-4244-1621-9",

publisher = "IEEE Society",

pages = "1199--1202",

editor = "s.n.",

booktitle = "Proceedings of 2008 International conference on condition monitoring and diagnosis CMD 2008",

note = "2008 International conference on condition monitoring and diagnosis, CMD 2008, Beijing China ; Conference date: 21-04-2008 Through 24-04-2008",

}

Gulski, E, Cichecki, P, Smit, JJ, Seitz, PP, Quak, B & de Vries, F 2008, On-site condition monitoring of HV power cables up to 150kV. in s.n. (ed.), Proceedings of 2008 International conference on condition monitoring and diagnosis CMD 2008. IEEE Society, Piscataway, pp. 1199-1202, 2008 International conference on condition monitoring and diagnosis, CMD 2008, Beijing China, 21/04/08. https://doi.org/10.1109/CMD.2008.4580503

On-site condition monitoring of HV power cables up to 150kV. / Gulski, E; Cichecki, P; Smit, JJ et al.
Proceedings of 2008 International conference on condition monitoring and diagnosis CMD 2008. ed. / s.n. Piscataway: IEEE Society, 2008. p. 1199-1202.

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

TY - GEN

T1 - On-site condition monitoring of HV power cables up to 150kV

AU - Gulski, E

AU - Cichecki, P

AU - Smit, JJ

AU - Seitz, PP

AU - Quak, B

AU - de Vries, F

PY - 2008

Y1 - 2008

N2 - For advanced, non-destructive on-site condition monitoring of HV power cables up to 150 kV by partial discharge detection and dielectric losses measurement it is necessary to energize the disconnected cable system. One of the methods available for this purpose is based on applying damped AC voltages up to 150 kV. In this contribution, the use of modern technological solutions in power electronics and signal processing as well as in technical design and production methods will be discussed on the basis of ultra light system which is able to on-site service aged HV cables.

AB - For advanced, non-destructive on-site condition monitoring of HV power cables up to 150 kV by partial discharge detection and dielectric losses measurement it is necessary to energize the disconnected cable system. One of the methods available for this purpose is based on applying damped AC voltages up to 150 kV. In this contribution, the use of modern technological solutions in power electronics and signal processing as well as in technical design and production methods will be discussed on the basis of ultra light system which is able to on-site service aged HV cables.

KW - conference contrib. refereed

KW - Conf.proc. > 3 pag

U2 - 10.1109/CMD.2008.4580503

DO - 10.1109/CMD.2008.4580503

M3 - Conference contribution

SN - 978-1-4244-1621-9

SP - 1199

EP - 1202

BT - Proceedings of 2008 International conference on condition monitoring and diagnosis CMD 2008

A2 - s.n., null

PB - IEEE Society

CY - Piscataway

T2 - 2008 International conference on condition monitoring and diagnosis, CMD 2008, Beijing China

Y2 - 21 April 2008 through 24 April 2008

ER -