Recess depth optimization for rotating, annular, and circular recess hydrostatic thrust bearing.

OJ Bakker, RAJ van Ostayen

Research output: Contribution to journalArticleScientificpeer-review

26 Citations (Scopus)

Abstract

Inertial effects due to the centripetal forces may become dominant at high rotational speeds in hydrostatic thrust bearings. Although this influence has been recognized in literature, bearings are commonly optimized with respect to the minimm friction, and the dissipation function has not been taken into account in the optimization procedures. It is observed that the secondary flow caused by the inertia term gives a large contribution to the dissipation for applications with a high rotational speed. In this study, the minimum dissipation for annular and circular recess thrust bearings operating at a certain rotational speed is determined by finding the optimum film thickness in the recess. An example is given for annula recess thrust bearings.
Original languageUndefined/Unknown
Pages (from-to)011103-1-011103-7
JournalTribology International
Volume132
Publication statusPublished - 2010

Keywords

  • CWTS 0.75 <= JFIS < 2.00

Cite this