Scanning Lens Phased Array Antennas: Analysis, design and demonstrations at millimeter and submillimeter wavelengths using leaky-wave feeds

Millimeter- and submillimeter wave applications, such as point-to-point wireless communications in beyond-5G scenarios, long-range automotive radars and astronomy and astrophysics science cases from space require antennas with high-gain beams that are steerable. At lower (microwave) frequencies, fully sampled phased arrays with thousands of elements have been demonstrated for this purpose. However, above roughly 100 GHz, integrated-circuit technology faces major bottlenecks in terms of size, power efficiency, thermal management and technological immaturity. Consequently, only integrated phased arrays with very few elements have been reported in the literature above 100 GHz. To still achieve the gain and enable beam scanning, mechanically actuated reflectors are now typically employed. However, such solutions are bulky, power-hungry and do not allow rapid beam steering. To overcome these limitations, we propose, analyze, design, fabricate and demonstrate a new antenna architecture in this thesis: the scanning lens phased array. The scanning lens phased array is a compact, low-power and very sparse array of integrated lens antennas that we demonstrate with scanning capabilities up to 25 degrees around broadside. A hybrid electro-mechanical approach to beam steering is employed: the array factor is scanned electronically and the element patterns are steered mechanically. The grating lobes that arise in the array factor due to the array’s sparsity are suppressed by the high directivity of the lens elements. This results in a clean, highgain beam towards the desired scan angle...