Simulation Study of Microwave Detection of Crack in Pipe System

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Abstract

The purpose of this research is to investigate on application of microwave engineering in non-destructive testing (NDT) for crack detecting in pipe system. Pipe was modelled with computer simulation technology, HFSS simulation software. The study is based on modelled a 10 cm pipe to determine the length and location of crack for full-length, half-length and quarter-length crack if crack width =0.2 mm, depth = 0.5 mm and length =10 mm. In this research we applied the microwave technique to detect crack based on measuring pipe S11 characteristic and tried to simulate a crack in different pipe shell layers.
Original languageEnglish
Title of host publicationProceedings of the Symposium on Concrete Modelling
Subtitle of host publicationCONMOD2018 27-30 August 2018 – Delft, Netherlands
EditorsErik Schlangen, Geert de Schutter, Branko Šavija, Hongzhi Zhang, Claudia Romero Rodriguez
PublisherRilem
Pages494-497
VolumePRO 127
ISBN (Electronic)978-2-35158-216-9
Publication statusPublished - 2018
EventSymposium on Concrete Modelling - Delft, Netherlands
Duration: 27 Aug 201830 Aug 2018

Publication series

NameRilem proceedings
PublisherRilem
NumberPRO 127

Conference

ConferenceSymposium on Concrete Modelling
Abbreviated titleCONMOD2018
CountryNetherlands
CityDelft
Period27/08/1830/08/18

Fingerprint Dive into the research topics of 'Simulation Study of Microwave Detection of Crack in Pipe System'. Together they form a unique fingerprint.

Cite this