TY - GEN
T1 - Towards micro transfer printing ready SNSPDs for fully integrated quantum photonic platforms
AU - Kramer, Linus
AU - Jaha, R.
AU - Lufungula, I. Luntadila
AU - Jin, L.
AU - Ferrari, S.
AU - Pernice, W.
PY - 2025
Y1 - 2025
N2 - Micro-transfer printing (uTP) facilitates the integration of pre-characterized components from different substrates onto one common carrier die. Its highly parallel nature allows for exceptional throughput [1]. Up to now, uTP has been successfully applied to print III-V amplifiers, lasers [2] , and quantum dot emitters [3] , among others. Our research focuses on fabricating devices containing waveguide-integrated superconducting nanowire single-photon detectors (SNSPDs) [4], that are ready to be transferred. Thanks to their outstanding performance, SNSPDs integrated on low-loss Silicon Nitride waveguides enable optical quantum computing [5] and quantum key distribution [6]. Enabling the transfer of SNSPDs would allow for precise on-demand detector placement and circumvents fabrication constraints that could compromise the quality of the superconducting film.The fabrication process involves the patterning nanowires, half-etched Si₃N₄ waveguides, and metal electrodes via electron beam lithography (EBL), followed by reactive ion etching (RIE), physical vapor deposition (PVD) or sputtering. In order for the Si₃N₄ device to be transferred, the final step employs hydrofluoric acid etching to dissolve the SiO₂ layer (see Fig. 1a and b) and make the device freestanding. Thereafter, a PDMS stamp is used to pick up the device, breaking its support structures and accurately place them on the dedicated carrier substrate.This photonic architecture is optimized for detecting photons at a 930 nm wavelength. For sacrificial test devices, grating couplers at both ends of the suspended structures facilitate integrity and functionality testing during fabrication, while metal contacts to the SNSPDs allow for electrical pretesting. This approach allows for a precise placement of pre-characterized waveguide-integrated SNSPDs on any substrate and thus the creation of hybrid architectures necessary for fully on-chip quantum photonic applications.
AB - Micro-transfer printing (uTP) facilitates the integration of pre-characterized components from different substrates onto one common carrier die. Its highly parallel nature allows for exceptional throughput [1]. Up to now, uTP has been successfully applied to print III-V amplifiers, lasers [2] , and quantum dot emitters [3] , among others. Our research focuses on fabricating devices containing waveguide-integrated superconducting nanowire single-photon detectors (SNSPDs) [4], that are ready to be transferred. Thanks to their outstanding performance, SNSPDs integrated on low-loss Silicon Nitride waveguides enable optical quantum computing [5] and quantum key distribution [6]. Enabling the transfer of SNSPDs would allow for precise on-demand detector placement and circumvents fabrication constraints that could compromise the quality of the superconducting film.The fabrication process involves the patterning nanowires, half-etched Si₃N₄ waveguides, and metal electrodes via electron beam lithography (EBL), followed by reactive ion etching (RIE), physical vapor deposition (PVD) or sputtering. In order for the Si₃N₄ device to be transferred, the final step employs hydrofluoric acid etching to dissolve the SiO₂ layer (see Fig. 1a and b) and make the device freestanding. Thereafter, a PDMS stamp is used to pick up the device, breaking its support structures and accurately place them on the dedicated carrier substrate.This photonic architecture is optimized for detecting photons at a 930 nm wavelength. For sacrificial test devices, grating couplers at both ends of the suspended structures facilitate integrity and functionality testing during fabrication, while metal contacts to the SNSPDs allow for electrical pretesting. This approach allows for a precise placement of pre-characterized waveguide-integrated SNSPDs on any substrate and thus the creation of hybrid architectures necessary for fully on-chip quantum photonic applications.
UR - http://www.scopus.com/inward/record.url?scp=105016123011&partnerID=8YFLogxK
U2 - 10.1109/ICTON67126.2025.11125068
DO - 10.1109/ICTON67126.2025.11125068
M3 - Conference contribution
AN - SCOPUS:105016123011
T3 - International Conference on Transparent Optical Networks
BT - Conference Proceedings - 2025 25th Anniversary International Conference on Transparent Optical Networks, ICTON 2025
A2 - Cojocaru, Crina
A2 - Spadaro, Salvatore
A2 - Marciniak, Marian
PB - IEEE
CY - Piscataway, NJ, USA
T2 - 25th Anniversary International Conference on Transparent Optical Networks, ICTON 2025
Y2 - 6 July 2025 through 10 July 2025
ER -