Research Output

2003

Modeling of a large scale evaporator with moving phase boundaries

Ahnert, F., Kikstra, JF. & Colonna di Paliano, P., 2003, Moving boundaries VII: computational modelling of free and moving boundary problems. Mammoli, AA. & Brebbia, CA. (eds.). Southampton: WIT Press, p. 315-324 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Sustainable Knowledge Growth

van Tooren, M., 5 Mar 2003

Research output: Book/ReportInaugural speechScientific

2009

Conceptual study of future aero-engine concepts

Dewanji, D., Gangoli Rao, A. & van Buijtenen, JP., 2009, In : International Journal of Turbo and Jet Engines. 26, 4, p. 263-276 14 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)
2010

Conceptual study of a hybrid turbofan engine with inter turbine burner

Tang, KG., Gangoli Rao, A. & van Buijtenen, JP., 2010, Proceedings of the ASME Turbo Expo 2010. Dr. Klaus Brun (ed.). Glasgow, Scotland: ASME, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)

Conceptual study of future aero-engine concepts

Dewanji, D., Gangoli Rao, A. & van Buijtenen, JP., 2010, In : International Journal of Turbo and Jet Engines. 26, 4, p. 263-276 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Development and implementation of a novel parametrization technique for multidisciplinary design initialization

Straathof, M. H., Van Tooren, M. J. L., Voskuijl, M. & Vos, R., 16 Dec 2010, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2010-3004

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

12 Citations (Scopus)

Fifth European Conference on Computational Fluid Dynamics ECCOMAS

Olivero, M., Javed, A. & van Buijtenen, JP., 2010, Development of a 1D Performance Analysis Tool for a Microturbine Radial Compressor using CFD. s.n. (ed.). Lisbon, Portugal: The European Community on Computational Methods in Applied Sciences ECCOMAS, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Numerical investigation of complex air flows generated by axial swirlers in a lean direct injection combustor

Dewanji, D., Gangoli Rao, A., Pourquie, M. & van Buijtenen, JP., 2010, Numerical investigation of complex air flows generated by axial swirlers in a lean direct injection combustor. STW (ed.). Maastricht Netherlands: Technology Foundation STW and Nederlandse Vlam Vereniging, p. 1-2 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Study of swirling air flow characteristics in a lean direct injection combustor

Dewanji, D., Gangoli Rao, A., Pourquie, M. & van Buijtenen, JP., 2010, Proceedings of the ASME Turbo Expo 2010. Dr. Klaus Brun (ed.). Glasgow, Scotland: ASME, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2011

AHEAD-Advanced Hybrid Engine for Aircraft Design

Gangoli Rao, A., 2011, In : Brandbrief Stw. July 2011, 18, p. 18-19 2 p.

Research output: Contribution to journalArticleProfessional

Applied aerodynamics and propulsion foundations: fixed wing vehicles

van Tooren, MJL., Gangoli Rao, A., Obert, E. & van Buijtenen, JP., 2011, Encyclopedia of Aerospace Engineering. R. Blockley, W. S. (ed.). Hoboken, USA: John Wiley & Sons, p. 3951-3963 5864 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Applied aerodynamics and propulsion foundations: rotary wing

van Holten, T. & Pavel, MD., 2011, Encyclopedia of Aerospace Engineering. R. Blockley, W. S. (ed.). Hoboken, USA: John Wiley & Sons, p. 3965-3977 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Basic Concepts: Propulsion and Power

Gangoli Rao, A. & van Buijtenen, JP., 2011, Encyclopedia of Aerospace Engineering. Blockley, R. & Shy, W. (eds.). Hoboken, USA: Wiley, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Environmental impact evaluation of aircraft at system of systems level

Schroijen, MJT., van Tooren, MJL., Voskuijl, M. & Curran, R., 2011, Proceedings of 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. s.n. (ed.). Denver, Colorado: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

Factors that Influence Pilot Task Demand Load During Area Navigation Approaches

Heiligers, MM., van Holten, T. & Mulder, M., 2011, In : Journal of Aircraft: devoted to aeronautical science and technology. 48, 3, p. 975-994 20 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Flight Mechanical Evaluation of Approaches

Heiligers, MM., van Holten, T. & Mulder, M., 2011, In : Journal of Aircraft: devoted to aeronautical science and technology. 48, 3, p. 963-974 12 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Implementation of a heterogeneous, variable-fidelity framewowrk for flight mechanics analysis in preliminary aircraft design

Pfeiffer, T., Nagel, B., Bohnke, D., Rizzi, A. & Voskuijl, M., 2011, Proceedings of the 60 Deutscher Luft- und Raumfahrtkongress. s.n. (ed.). Bremen: DGLR, p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Multidisciplinary Design and Optimization of a Plastic Injection Mold using an Integrated Design and Engineering Environment

van Dijk, REC., d'Ippolito, R., Tosi, G. & La Rocca, G., 2011, Proceedings of the NAFEMS World Congress 2011. s.n. (ed.). Boston: NAFEMS, p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Numerical investigation of complex air flows generated by axial swirlers in a lean direct injection combustor

Dewanji, D. & Gangoli Rao, A., 2011, Proceedings of Numerical Investigation of Multiphase Flow in the Single-Element and Multipoint Lean Direct Injection Combustors. sn (ed.). Ede: STW/ & NVV, p. 1-2 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Pilot task demand load during RNAV approaches with a Cessna Citation

Heiligers, MM., Bennekom, KTP., Tuinen, TJ., van Holten, T. & Mulder, M., 2011, In : The Aeronautical Journal. 115, 1169, p. 421-439 19 p.

Research output: Contribution to journalArticleScientificpeer-review

Rotary wing vehicles

Pavel, MD. & van Holten, T., 2011, Encyclopedia of Aerospace Engineering. R. Blockley, W. S. (ed.). Hoboken, USA: John Wiley & Sons, p. 4099-4109 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Topology design of pressure adaptive honeycomb for a morphing fowler flap

Scheepstra, J., Vos, R. & Barrett, R., 1 Dec 2011, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2011-2130

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

4 Citations (Scopus)
2012

A Conceptual Design and Analysis Tool for Blended Wing Body Aircraft

van Dommelen, J. & Vos, R., 2012, Proceedings of the International Congress of the Aeronautical Sciences. s.n. (ed.). Brisbane: ICAS, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

A conceptual design and optimization method for blended-wing-body aircraft

Vos, R. & Van Dommelen, J., 1 Dec 2012, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2012-1756

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A conceptual Design Optimization Method for Blended-Wing-Body Aircraft

Vos, R. & van Dommelen, J., 2012, Proceedings of the 8th AIAA Multidiciplinary Design Optimization Specialist Conference. s.n. (ed.). Honolulu: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A KBE Application for Automatic Aircraft Wire Harness Routing

Zhu, Z., van Tooren, MJL. & La Rocca, G., 2012, Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC Structure, Structural Dynamics and Materials Conference. Russel, S. G. (ed.). Honolulu: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

An advanced Quasi-Analytical Weight Estimation Method for Airplane Lifting Surface

Elham, A., La Rocca, G. & van Tooren, MJL., 2012, Proceedings of the 71th Annual Conference of Society of Allied Weight Engineers, Inc.. Mascrary, M. (ed.). SAWE, p. 1-19 19 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

An advanced Quasi-Analytical Weight Estimation Method for Airplane Lifting Surfaces

Elham, A., La Rocca, G. & van Tooren, MJL., 2012, Proceedings of the 71th Annual Conference of Society of Allied Weight Engineers, Inc.. s.n. (ed.). Long Beach: SAWE Inc., p. 1-19 19 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

1 Citation (Scopus)

A New structural Concept For Blended Wing Body Cabins

Vos, R., Geuskens, FJJMM. & Hoogreef, MFM., 2012, Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. s.n. (ed.). Honolulu: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

A new structural design concept for blended wing body cabins

Vos, R., Geuskens, F. J. J. M. M. & Hoogreef, M. F. M., 1 Dec 2012, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2012-1998

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

10 Citations (Scopus)

An investigation on the strain distribution of resistance welded thermoplastic composite joints

Shi, H., Fernandez Villegas, I. & Bersee, HEN., 2012, Proceedings of the 53rd AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012, Honolulu, Hawaii. n.a. (ed.). Honolulu, Hawaii: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-9 9 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Automatic Flattening Of Three-Dimensional Wiring Harnesses For Manufacturing, paper ICAS2012-6.4.2

van den Berg, T., La Rocca, G. & van Tooren, MJL., 2012, 28th congress of the International Council of the Aeronautical Sciences. Grant, I. (ed.). Brisbane: ICAS, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Communication in Aircraft Design: Can we establish a Common Language?

Nagel, B., Bohnke, D., Gollnick, V., Schmollgruber, P., Alonso, JJ., Rizzi, A. & La Rocca, G., 2012, Proceedings of the 28th congress of the International Council of the Aeronautical Sciences, paper ICAS2012-1.9.1. Grant, I. (ed.). Brisbane: ICAS, p. 1-13 13 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

90 Citations (Scopus)

Conceptual Design of a Magnetic-Assisted Take-off System for Mid-Range Transport Aircraft

Vos, R., Eeckels, C., Schoustra, R. & Voskuijl, M., 2012, proceedings of the 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. s.n. (ed.). Washington DC: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-14 14 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Concurrent aerospace thermoplastic stiffened panel conceptual design and cost estimation using knowledge based engineering

Zhao, X., Wang, H., Curran, R. & van Tooren, MJL., 2012, Concurrent engineering approaches for sustainable product development in a multi-disciplinary environment. Stjepandic, J., Rock, G. & Bil, C. (eds.). London: Springer, p. 195-206 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Design, construction and validation of a new boundary layer rake for full-scale testing

Elham, A., Van Raemdonck, GMR. & van Tooren, MJL., 2012, In : Flow Measurement and Instrumentation. 26, p. 30-36 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
2 Citations (Scopus)

Dynamic performance of post-buckled precompressed piezoelectric actuator elements

Giannopoulos, G., Groen, M., Vos, R. & Barrett, R., 2012, In : International Journal of Structural Stability and Dynamics. 12, 5, p. 1-19 19 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
3 Citations (Scopus)

Effect of wing-box structure on the optimum wing outer shape

Elham, A. & van Tooren, MJL., 2012, proceedings of the RAeS 3rd Aircraft Structural Design Conference. Gurdal, Z. (ed.). London: Royal Aeronautocal Society, p. 1-25 25 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Enabling Control Software Generation by using Mechatronics Modelling Primitives

Foeken, MJ., Alvarez Cabrera, AA., Voskuijl, M. & van Tooren, MJL., 2012, In : Advanced Engineering Informatics: the science of supporting knowledge-intensive activities. 26, 2, p. 196-206 11 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Flight mechanics modelling of the Prandtl plane for conceptual and preliminary design

Voskuijl, M., de Klerk, J. & Ginneken, D., 2012, Variational analysis and Aerospace Engineering: Mathematical Challenges for Aerospace Design. Buttazzo, G. & Frediani, A. (eds.). Springer, p. 435-462 500 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Flow characteristics in Lean Direct Injection Combustors

Dewanji, D., 2012, Enchede: Ipskamp Drukkers B.V.. 177 p.

Research output: ThesisDissertation (TU Delft)

23 Citations (Scopus)

Formation Flight - Fine-tuning of Theoretical Performance Prediction. AIAA 2013-0961

Veldhuis, LLM., Voskuijl, M. & Fransen, B., 2012, proceedings of the 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. s.n. (ed.). Washington DC: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-17 17 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

GABRIEL operational concept. Deliverable 2.9

Rohacs, J., Rohacs, D., Schmollgruber, P. & Voskuijl, M., 2012, Eurpean Commission. 47 p.

Research output: Book/ReportReportProfessional

Gendl TM meets X3DOM: The Declarative Web, all the Way down

Cooper, D. & van Dijk, REC., 2012, p. 187-187. 1 p.

Research output: Contribution to conferenceAbstractScientific

Knowledge based engineering to support complex product design

La Rocca, G. & van Tooren, MJL., 2012, In : Advanced Engineering Informatics: the science of supporting knowledge-intensive activities. p. 157-158 2 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Lean Direct Injection

Dewanji, D., 2012, In : Leonardo times. 16, 2, p. 12-14 3 p.

Research output: Contribution to journalArticleProfessional

Multidisciplinary Design and Optimization Framework for Aircraft Box Structures

van Dijk, REC., Zhao, X., Wang, H. & van Dalen, F., 2012, Proceedings of the 3rd Aircraft Design Conference. s.n. (ed.). Delft: Royal Aeronautical Society, p. 1-25 25 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Next Generation Design Systems

van Dijk, REC. & van Tooren, MJL., 2012, proceedings of the TMCE 2012. s.n. (ed.). Karlsruhe: TMCE 2010, p. 17-18 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Next Generation Design Systems: Knowledge-Based Multi-disciplinary Design Optimization

van Dijk, REC., 2012, Proceedings of the Optimus World Conference. sn (ed.). Munich: OWC, p. 1-2 2 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review