Poly-SiO_x Passivating Contacts with Plasma-Assisted N₂O Oxidation of Silicon (PANO-SiO_x)

Passivating contacts are crucial for realizing high-performance crystalline silicon solar cells. Herein, contact formation by plasma-enhanced chemical vapor deposition (PECVD) followed by an annealing step is focused on. Poly-SiO_x passivating contacts by combining plasma-assisted N₂O-based oxidation of silicon (PANO-SiO_x) with a thin film of phosphorus (n⁺) or boron (p⁺)-doped hydrogenated amorphous silicon oxide (a-SiO_x:H) are manufactured. Postannealing is conducted for transitioning a-SiO_x:H into poly-SiO_x. The aim is to achieve a contact with low absorption and high-quality passivation. It is demonstrated that by tuning the plasma oxidation process time and power, the PANO-SiO_x thickness and its passivation quality can be controlled. A higher SiO₂ content is observed in PANO-SiO_x than in the nitric acid oxidation of silicon (NAOS-SiO_x) counterpart. PANO-SiO_x acts as a stronger diffusion barrier for both boron and phosphorus atoms compared to NAOS-SiO_x, affecting the dopant distribution during annealing. Implied open-circuit voltages up to 751 and 710 mV for n⁺ and p⁺ flat symmetric samples, respectively, are demonstrated. With respect to standard thermally grown SiO₂ tunneling oxide combined with (in/ex)situ-doped low-pressure chemical vapor deposition poly-Si, this study presents a simple alternative for manufacturing passivating contact fully based on PECVD processes.