Growing LaAlO3/SrTiO3 interfaces by sputter deposition

IM Dildar, M Neklyudova, Q Xu, HW Zandbergen, S Harkema, D Boltje, J Aarts

    Research output: Contribution to journalArticleScientificpeer-review

    5 Citations (Scopus)

    Abstract

    Sputter deposition of oxide materials in a high-pressure oxygen atmosphere is a well-known technique to produce thin films of perovskite oxides in particular. Also interfaces can be fabricated, which we demonstrated recently by growing LaAlO3 on SrTiO3 substrates and showing that the interface showed the same high degree of epitaxy and atomic order as is made by pulsed laser deposition. However, the high pressure sputtering of oxides is not trivial and number of parameters are needed to be optimized for epitaxial growth. Here we elaborate on the earlier work to show that only a relatively small parameter window exists with respect to oxygen pressure, growth temperature, radiofrequency power supply and target to substrate distance. In particular the sensitivity to oxygen pressure makes it more difficult to vary the oxygen stoichiometry at the interface, yielding it insulating rather than conducting.
    Original languageEnglish
    Pages (from-to)1-11
    Number of pages11
    JournalAIP Advances
    Volume5
    Issue number6
    Publication statusPublished - 2015

    Fingerprint Dive into the research topics of 'Growing LaAlO3/SrTiO3 interfaces by sputter deposition'. Together they form a unique fingerprint.

    Cite this