On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions

Thomas Borner; Francesco De Zan; Paco Lopez Dekker

doi:10.1109/IGARSS.2012.6350602

On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions

Thomas Borner^*, Francesco De Zan, Paco Lopez Dekker

^*Corresponding author for this work

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

1 Citation (Scopus)

Abstract

In this paper a baseline (height) self-calibration concept is introduced and applied to simulations of two different single-pass interferometric SAR systems with a single-swath and a dual-swath configuration. The results will show that the general performance is very promising and that, by simultaneously acquiring two separated swathes, accuracies in the sub-decimetric range can be reached.

Original language	English
Title of host publication	IGARSS 2012 - 2012 IEEE International Geoscience and Remote Sensing Symposium
Pages	3285-3288
Number of pages	4
DOIs	https://doi.org/10.1109/IGARSS.2012.6350602
Publication status	Published - 2012
Externally published	Yes
Event	IGARSS 2012 - Remote Sensing for a Dynamic Earth, Munich, Germany - Piscataway, NJ, USA, Munich, Germany Duration: 22 Jul 2012 → 27 Jul 2012 Conference number: 32

Conference

Conference	IGARSS 2012 - Remote Sensing for a Dynamic Earth, Munich, Germany
Abbreviated title	IGARSS 2012
Country/Territory	Germany
City	Munich
Period	22/07/12 → 27/07/12

Keywords

calibration
Interferometry
performance
SAR
SIGNAL

Access to Document

10.1109/IGARSS.2012.6350602

Cite this

@inproceedings{07017928d09f4e248b44d31c82a39917,

title = "On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions",

abstract = "In this paper a baseline (height) self-calibration concept is introduced and applied to simulations of two different single-pass interferometric SAR systems with a single-swath and a dual-swath configuration. The results will show that the general performance is very promising and that, by simultaneously acquiring two separated swathes, accuracies in the sub-decimetric range can be reached.",

keywords = "calibration, Interferometry, performance, SAR, SIGNAL",

author = "Thomas Borner and {De Zan}, Francesco and {Lopez Dekker}, Paco",

year = "2012",

doi = "10.1109/IGARSS.2012.6350602",

language = "English",

pages = "3285--3288",

booktitle = "IGARSS 2012 - 2012 IEEE International Geoscience and Remote Sensing Symposium",

note = "IGARSS 2012 - Remote Sensing for a Dynamic Earth, Munich, Germany, IGARSS 2012 ; Conference date: 22-07-2012 Through 27-07-2012",

}

Borner, T, De Zan, F & Lopez Dekker, P 2012, On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions. in IGARSS 2012 - 2012 IEEE International Geoscience and Remote Sensing Symposium., 6350602, pp. 3285-3288, IGARSS 2012 - Remote Sensing for a Dynamic Earth, Munich, Germany, Munich, Germany, 22/07/12. https://doi.org/10.1109/IGARSS.2012.6350602

On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions. / Borner, Thomas; De Zan, Francesco; Lopez Dekker, Paco.
IGARSS 2012 - 2012 IEEE International Geoscience and Remote Sensing Symposium. 2012. p. 3285-3288 6350602.

Research output: Chapter in Book/Conference proceedings/Edited volume › Conference contribution › Scientific › peer-review

TY - GEN

T1 - On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions

AU - Borner, Thomas

AU - De Zan, Francesco

AU - Lopez Dekker, Paco

N1 - Conference code: 32

PY - 2012

Y1 - 2012

N2 - In this paper a baseline (height) self-calibration concept is introduced and applied to simulations of two different single-pass interferometric SAR systems with a single-swath and a dual-swath configuration. The results will show that the general performance is very promising and that, by simultaneously acquiring two separated swathes, accuracies in the sub-decimetric range can be reached.

AB - In this paper a baseline (height) self-calibration concept is introduced and applied to simulations of two different single-pass interferometric SAR systems with a single-swath and a dual-swath configuration. The results will show that the general performance is very promising and that, by simultaneously acquiring two separated swathes, accuracies in the sub-decimetric range can be reached.

KW - calibration

KW - Interferometry

KW - performance

KW - SAR

KW - SIGNAL

UR - http://www.scopus.com/inward/record.url?scp=84873121614&partnerID=8YFLogxK

U2 - 10.1109/IGARSS.2012.6350602

DO - 10.1109/IGARSS.2012.6350602

M3 - Conference contribution

AN - SCOPUS:84873121614

SP - 3285

EP - 3288

BT - IGARSS 2012 - 2012 IEEE International Geoscience and Remote Sensing Symposium

T2 - IGARSS 2012 - Remote Sensing for a Dynamic Earth, Munich, Germany

Y2 - 22 July 2012 through 27 July 2012

ER -

On the performance of baseline self-calibration using intersecting interferometric SAR acquisitions

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this