A two-phased modelling approach for corrosion-induced concrete cracking and bond deterioration in reinforced concrete

C. Van Steen*, T. Van Beirendonck, R. Vrijdaghs, M. A.N. Hendriks, E. Verstrynge

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)
44 Downloads (Pure)

Abstract

Bond deterioration is one of the major consequences of reinforcement corrosion in reinforced concrete (RC) structures. In this paper, a two-phased numerical modelling approach is presented that aims to determine the constitutive behaviour (bond–slip) at the reinforcement-concrete interface at a certain corrosion level. The novelty of the approach is that it consists of a crack model and a bond model, and that the flow of corrosion products into the pores and corrosion-induced cracks as well as the effect of the bonded length and concrete cover are taken into account in the 2D crack model. The resulting expansion of corrosion products from the crack model is used as input in the 3D bond model. The combination of both models leads to a procedure that balances computational time and modelling detail. The model is validated on a substantial amount of experimental pull-out test results. A good agreement is obtained between the experimental data and the models for different corrosion levels in terms of crack width, crack pattern, corrosion-induced bond loss, and failure mode.

Original languageEnglish
Article number116624
Number of pages14
JournalEngineering Structures
Volume294
DOIs
Publication statusPublished - 2023

Bibliographical note

Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care
Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.

Keywords

  • Bond
  • Corrosion
  • Finite element model
  • Reinforced concrete

Fingerprint

Dive into the research topics of 'A two-phased modelling approach for corrosion-induced concrete cracking and bond deterioration in reinforced concrete'. Together they form a unique fingerprint.

Cite this