Investigation of mode-II delamination fracture energy with a discontinuous computational homogenization model

Numerical methods for delamination analysis, such as the cohesive zone method, require fracture energy as an essential input. Existing formulations rely on a phenomenological relationship that links fracture energy to the mode of fracture based on linear elastic fracture mechanics (LEFM). However, doubts exist about the applicability of LEFM. It has been demonstrated that the phenomenological relationships describing fracture energy as a function of mode-ratio are not universally valid. Computational homogenization (FE²) provides an alternative where the dissipative mechanisms can be resolved on the microscale. This paper aims to assess the suitability of a proposed discontinuous FE² framework for characterizing delamination growth under mode-II conditions by comparing it to direct numerical simulations (DNS). The impact of plasticity on effective fracture energy is evaluated for two distinct mode-II test configurations. The dissipation density from the bulk integration points within the delamination propagation zone is monitored. The findings demonstrate the FE² model's capability to accurately capture plastic energy dissipation around a growing crack. Variations in plastic dissipation are observed between the mTCT and ENF test setups, leading to differences in effective mode-II fracture energy. These nuances, unaccounted for in state-of-the-art mesoscale cohesive models, highlight the FE² framework's potential for enhancing delamination modeling.