TY - JOUR
T1 - Investigation of non-ideal effects in compressible boundary layers of dense vapors through direct numerical simulations
AU - Tosto, Francesco
AU - Wheeler, Andrew
AU - Pini, Matteo
PY - 2024
Y1 - 2024
N2 - In this work, we present an investigation about the sources of dissipation in adiabatic boundary layers of non-ideal compressible fluid flows. Direct numerical simulations (DNS) of transitional, zero-pressure gradient boundary layer flows are performed for two fluids characterized by different complexity of the fluid molecules, namely, “air” and siloxane MM. Different sets of thermodynamic free-stream boundary conditions are selected to evaluate the influence of the fluid state on both the frictional loss and the dissipation mechanisms. The thermophysical properties of siloxane MM are calculated with a state-of-the-art equation of state. Results show that the dissipation due to both time-mean strain field, irreversible heat transfer, and turbulent dissipation differs significantly depending on both the molecular complexity of the fluid and its thermodynamic state. The dissipation coefficient calculated from the DNS results is then compared against the one obtained using a reduced-order model (ROM), which solves the two-dimensional boundary layer flow equations for an arbitrary fluid [M. Pini and C. De Servi, “Entropy generation in laminar boundary layers of non-ideal fluid flows,” in 2nd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power (Springer, 2020), pp. 104-117]. Results from both the DNS and the ROM show that low values of the overall dissipation are observed in the case of fluids made of simple molecules, e.g., air, and if the fluid is at a thermodynamic state in the proximity of that of the vapor-liquid critical point.
AB - In this work, we present an investigation about the sources of dissipation in adiabatic boundary layers of non-ideal compressible fluid flows. Direct numerical simulations (DNS) of transitional, zero-pressure gradient boundary layer flows are performed for two fluids characterized by different complexity of the fluid molecules, namely, “air” and siloxane MM. Different sets of thermodynamic free-stream boundary conditions are selected to evaluate the influence of the fluid state on both the frictional loss and the dissipation mechanisms. The thermophysical properties of siloxane MM are calculated with a state-of-the-art equation of state. Results show that the dissipation due to both time-mean strain field, irreversible heat transfer, and turbulent dissipation differs significantly depending on both the molecular complexity of the fluid and its thermodynamic state. The dissipation coefficient calculated from the DNS results is then compared against the one obtained using a reduced-order model (ROM), which solves the two-dimensional boundary layer flow equations for an arbitrary fluid [M. Pini and C. De Servi, “Entropy generation in laminar boundary layers of non-ideal fluid flows,” in 2nd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power (Springer, 2020), pp. 104-117]. Results from both the DNS and the ROM show that low values of the overall dissipation are observed in the case of fluids made of simple molecules, e.g., air, and if the fluid is at a thermodynamic state in the proximity of that of the vapor-liquid critical point.
UR - http://www.scopus.com/inward/record.url?scp=85183315543&partnerID=8YFLogxK
U2 - 10.1063/5.0179570
DO - 10.1063/5.0179570
M3 - Article
AN - SCOPUS:85183315543
SN - 1070-6631
VL - 36
JO - Physics of Fluids
JF - Physics of Fluids
IS - 1
M1 - 016145
ER -