If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2016

Characterization of structural change in rail surface using advance automatic crystallographic orientation microscopy

Wu, J., Petrov, R., Li, S., Li, Z., Godet, S., Malet, L. & Sietsma, J., 2016, Proceedings of the 15th International Conference on Railway Engineering Design and Operation, CR 2016, Valencia, Spain. Brebbia, C. A. & Mera, J. M. (eds.). WIT Press, Vol. 162. p. 367-376 (WIT Transactions on the Built Environment; vol. 162).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Mechanical properties anisotropy in X80 line pipes

Gervasyev, A., Petrov, R., Pyshmintsev, I., Struin, A. & Leis, B., 2016, Proceedings of the 11th International Pipeline Conference (IPC 2016): Volume 3: perations, Monitoring and Maintenance; Materials and Joining. New York, NY, USA: ASME, Vol. 3. 7 p. IPC2016-64695

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

6 Citations (Scopus)

Thermo-mechanical effects in the formation mechanism of rail squats

Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2016, Proceedings of the 3rd international conference on railway technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire: Civil-Comp Press, Vol. 110. p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2015

Computation of the flash-temperature at the wheel-rail contact using a 3D finite element model and its comparison with analytical methods

Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2015, Proceedings of the 10th international conference on contact mechanics, CM2015. Tournay, H. & Grassie, S. (eds.). Pueblo, USA: Transportation Technology Center - AAR, p. 1-10 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Microstructural evolution during ultrafast heat treament of medium carbon steels

Papaefthymiou, S., Goulas, K., Cerda, F. C., Sietsma, J. & Petrov, R., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 569-570

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Shear banding and its contribution to texture evolution in rotated Goss orientations of BCC structured materials

Nguyen-MInh, T., Sidor, J. J., Petrov, RH. & Kestens, LAI., 2015, Proceedings of the 17th International Conference on Textures of Materials. Skrotzki, W. & Oertel, CG. (eds.). Bristol, UK: IOP Publishing, 4 p. (IOP Conference Series: Materials Science and Engineering; vol. 82).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

3 Citations (Scopus)

Ultrafast heating of advanced high strength steels

Petrov, R. H., Puype, A., De Knijf, D. & Kestens, L., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1157-1158

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2 Citations (Scopus)
2014

A microstructural study of rolling contact fatigue in rails

Wu, J., Petrov, RH., Naeimi, M., Li, Z. & Sietsma, J., 2014, Proceedings of the 2nd International Conference on Railway Technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire, UK: Civil-Comp Press, p. 1-18 18 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Combined martensite and bainite formation from austenite decomposition in HSLA steel

da Silva, EP., Xu, W., Fojer, C., Hoebaert, Y., Sietsma, J. & Petrov, RH., 2014, Proceedings of the 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 682-687 6 p. (Advanced Materials Research; vol. 922).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Microstructural control of ductile crack propagation in TMCP HSLA pipeline steels

Carretero Olalla, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Zurich, Switzerland: Trans Tech Publications, p. 568-573 6 p. (Advanced Materials Research; vol. 922).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access

Substantial fatigue similarity of a new small-scale test rig to actual wheel-rail system

Naeimi, M., Li, Z., Petrov, RH., Dollevoet, RPBJ., Sietsma, J. & Wu, J., 2014, Proceedings of the International Conference on Railway Systems Engineering and Management. Liu, G., Said, R. & et, A. (eds.). Riverside, UK: WASET, p. 1795-1803 9 p. (International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering; vol. 8).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2013

Austenite stability study by micro-tensile testing of Q&P steel.

Knijff, D., Petrov, RH., Föjer, C. & Kestens, LAI., 2013, Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels.. Hickey, KD. & Ashburn, RE. (eds.). Vail, Colorado, USA: AIST, p. 185-195 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Automatic meshing method for optimization of the fusion zone dimensions in finite element models of welds

Decroos, K., Ohms, C., Petrov, RH., Seefeldt, M., Verhaeghe, F. & Kestens, LAI., 2013, Proceedings International Conference on Residual Stresses 9. Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 597-604 8 p. (Materials Science Forum; vol. 768-769).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2012

Effect of heat treatment on fracture during bending in AA6016 aluminium alloy sheets

Davidkov, A., Petrov, RH., de Smet, P. & Kestens, LAI., 2012, Advances in fracture and damage mechanics. Tonkovic, Z. & Aliabadi, MH. (eds.). s.l.: s.n., p. 521-524 4 p. (Key Engineering Materials; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

Modeling the magnetic properties of non-oriented electrical steels based on microstructural parameters

Pirgazi, H., Petrov, RH. & Kestens, LAI., 2012, Textures of materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 734-737 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
6 Citations (Scopus)

Recrystallization texture of ferrite steels: beyond the gamma-fibre

Gobernado Hernandez, P., Petrov, RH., Moerman, J., Barbatti, C. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 790-793 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
2 Citations (Scopus)

Recrystallization textures in aluminum alloys experimental study and modelling

Sidor, JJ., Petrov, RH. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 611-614 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
1 Citation (Scopus)

Texture formation in high strength low alloy steel reheated with ultrafast heating rates

Petrov, RH., Sidor, J. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 798-801 4 p. (Materials Science Forum; vol. 2012).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
12 Citations (Scopus)
2010

3D-microstructure and texture characterization after "in-situ" and "ex-situ" sample preparation.

Petrov, RH., León García, O., Sharma, H. & Kestens, LAI., 2010, Proceedings of the 31st Risø International Symposium on Materials Science: Challenges in Materials Science and Possibilities in 3D and 4D Characterization Techniques.. Hansen, N., Juul Jensen, D., Nielsen, SF., Poulsen, HF. & Ralph, B. (eds.). Roskilde, Denmark: Technical University of Denmark, p. 383-390 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Revealing complex microstructures by 3D analysis.

Sharma, H., van Bohemen, SMC., Petrov, RH. & Sietsma, J., 2010, Proceedings of the 31st Risø International Symposium on Materials Science: Challenges in Materials Science and Possibilities in 3D and 4D Characterization Techniques.. Hansen, N., Juul Jensen, D., Nielsen, SF., Poulsen, HF. & Ralph, B. (eds.). Roskilde, Denmark: Technical University of Denmark, p. 421-428 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2009

3D-microstructural and texture characterization in different length scales.

Petrov, RH., Gobernado Hernandez, P., León García, O., Sharma, H. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions Volume 201. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 197-204 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Avoiding roping and ridging in AA6XXX sheets: characterizing the initial state.

Bennett, TA., Petrov, RH. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 373-380 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Recrystallization texture development under various thermo-mechanical conditions in aluminium alloys.

Sidor, J., Kestens, LAI., Miroux, AG. & Petrov, RH., 2009, Light Metals 2009. Bearne, G. (ed.). Warrendale, PA, USA: The Minerals, Metals & Materials Society, p. 1221-1224 4 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Relative preference for strain localizations in ultra low carbon steel.

Khatirkar, R., Kestens, LAI., Petrov, RH. & Samajdar, I., 2009, Materials Processing and Texture, Ceramic Transactions, Volume 200. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 217-221 5 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Texture and microstructure evolution at the metal-vapor interface during transformation annealing in a Mn and Al alloyed ultra low carbon steel.

Kestens, LAI., Gautam, JP. & Petrov, RH., 2009, Proceedings of the Conference on Microstructure and Texture in Steels and other Materials. Haldar, A., Suwas, S. & Bhattarcharjee, D. (eds.). London, United Kingdom: Springer, p. 103-109 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Texture control in manufacturing current and future grades of low-carbon steel sheet.

Kestens, LAI. & Petrov, RH., 2009, Materials Processing and Texture, Ceramic Transactions, Volume 200. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 207-216 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Texture modification in asymmetrically rolled aluminium sheets.

Sidor, J., Petrov, RH., Miroux, AG. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 547-554 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

The role of Mg in void formation during plastic deformation of AA6016 aluminium alloys.

León García, O., Petrov, RH. & Kestens, LAI., 2009, Proceedings of the 12th International Conference on Fracture (ICF 12). s.n. (ed.). Ottawa, Canada: s.n., p. 1-8 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

2008

Characterizing the microstructure in AA6016 exhibiting roping.

Bennett, TA., Zhuang, LZ., Ratchev, P., Petrov, RH. & Kestens, LAI., 2008, Proceedings of ICAA 11. Hirsch, J., Skrotzki, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 1803-1808 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Deformation and recrystallization texture control in 6016 Al alloy.

Sidor, J., Kestens, LAI., Petrov, RH., Miroux, AG., Zhuang, LZ., van der Winden, MR., de Smet, P. & Ratchev, P., 2008, Proceedings of ICAA 11. Hirsch, J., Skrotzki, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 1149-1155 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Local characterization of void initiation on IF steel by FIB-EBSD technique.

León García, O., Petrov, RH. & Kestens, LAI., 2008, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 693-700 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)

Microstructure dependence of Charpy impact toughness anisotropy for steel grades API-80 and API-X70.

Sanchez, N., Petrov, RH., Bae, J-H. & Kestens, LAI., 2008, Proceedings of the 3rd International Conference of Thermo-Mechanical Processing of Steels.. s.n. (ed.). Padua, Italy: Associazione Italiana di Metallurgia, p. 1-12 12 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

Shape recovery and ¿ -.¿ transformation in Fe29Mn7Si5Cr SMA

van Caenegem, N., Verbeken, K., Petrov, RH., van der Pers, NM. & Houbaert, Y., 2008, Advances in Science and Technology. s.n. (ed.). Switzerland: Trans Tech Publications, p. 86-91 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

1 Citation (Scopus)
2007

3D microstructural and texture characterization by means of focused ion beam microscope and integrated EBSD system.

Petrov, RH., León García, O. & Kestens, LAI., 2007, Proceedings of the 25th Jubilee International Scientific Conference MTF 2007. Tabakova, B., Dobrzev, P., Yankova, I., Dimitrova, R. & Saikova, B. (eds.). Sofia, Bulgaria: Publishing House Technical University, p. 34-39 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Fatigue crack initiation in dual-phase steels in relation to microstructure

Cheng, X., Janssen, M., Riemslag, AC., Kwakernaak, C., Petrov, RH., Vass, A., Kop, TA. & Hanlon, DN., 2007, Proceedings 7th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (36th ASTM National Symposium on Fatigue and Fracture Mechanics), Tampa, Florida, USA, 14-16 November 2007. s.n. (ed.). s.l.: ASTM/ESIS, p. 1-11 11 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

2006

A study of microstructural anisotropy of pipeline steel by means of 3D-EBSD.

Petrov, RH., Leon Garcia, O., Kestens, LAI. & Houbaert, Y., 2006, Proceedings of the EBSD Users Meeting 2006. s.n. (ed.). Hindsgavl Castle, Denmark: Oxford Instruments HKL, p. 50-55 6 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Transformation behaviors in intercritically annealed and as-hot rolled TRIP steels.

Petrov, RH., Jonas, JJ. & Kestens, LAI., 2006, Proceedings of the Second Baosteel Biennial Academic Conference (BAC 2006). sn (ed.). Shanghai, China: bac2006, p. 319-325 7 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review