Structural Integrity & Composites

Research Output

2020

80 Years of Aerospace Engineering Education in the Netherlands

Saunders, G., Melkert, J. & Schuurman, M., 2020, AIAA Scitech 2020 Forum: 6-10 January 2020, Orlando, FL. American Institute of Aeronautics and Astronautics Inc. (AIAA), 19 p. AIAA 2020-0643

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
148 Downloads (Pure)

Accuracy of strain measurement systems on a non-isotropic material and its uncertainty on finite element analysis

Baldassarre, A., Ocampo, J., Martinez, M. & Rans, C., 2020, In : Journal of Strain Analysis for Engineering Design. 20 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
8 Downloads (Pure)

A cycle-by-cycle fatigue damage analysis of biaxial composite structures utilizing acoustic emission

Zarouchas, D. S., Pascoe, J. A. & Alderliesten, R. C., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
44 Downloads (Pure)

A gaussian beam based recursive stiffness matrix model to simulate ultrasonic array signals from multi-layered media

Anand, C., Groves, R. & Benedictus, R., 2 Aug 2020, In : Sensors (Switzerland). 20, 16, p. 1-15 15 p., 4371.

Research output: Contribution to journalLetterScientificpeer-review

Open Access
File
3 Downloads (Pure)

Algorithm assessment for layup defect segmentation from laser line scan sensor based image data

Meister, S., Wermes, M. A. M., Stüve, J. & Groves, R. M., 2020, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2020. Huang, H., Sohn, H. & Zonta, D. (eds.). SPIE, Vol. 11379. 1137918

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

An adaptive probabilistic data-driven methodology for prognosis of the fatigue life of composite structures

Eleftheroglou, N., Zarouchas, D. & Benedictus, R., 1 Aug 2020, In : Composite Structures. 245, 9 p., 112386.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
31 Downloads (Pure)

Analysis of a SD-OCT-based hyperspectral system for spectral reflectance measurements

Maria, M., Anisimov, A. G., Stols-Witlox, M. & Groves, R. M., 1 Jan 2020, Optical Sensing and Detection VI. Berghmans, F. & Mignani, A. G. (eds.). SPIE, 8 p. 113541J. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11354).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
1 Downloads (Pure)
Open Access
File
9 Downloads (Pure)

Damage assessment of NCF, 2D and 3D Woven Composites under Compression After Multiple-Impact using Acoustic Emission

Saeedifar, M., Saleh, M. N., El-Dessouky, H. M., Freitas, S. T. D. & Zarouchas, D., May 2020, In : Composites Part A: Applied Science and Manufacturing. 132, p. 105833 15 p., 105833.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
41 Downloads (Pure)

Damage characterization of laminated composites using acoustic emission: A review

Saeedifar, M. & Zarouchas, D., 2020, In : Composites Part B: Engineering. 195, 108039.

Research output: Contribution to journalReview articleScientificpeer-review

Open Access
File
6 Downloads (Pure)
Open Access
File
24 Downloads (Pure)

Effect of interlaying UV-irradiated PEEK fibres on the mechanical, impact and fracture response of aerospace-grade carbon fibre/epoxy composites

Quan, D., Deegan, B., Binsfeld, L., Li, X., Atkinson, J., Ivanković, A. & Murphy, N., 15 Jun 2020, In : Composites Part B: Engineering. 191, 13 p., 107923.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Effect of residual stress redistribution and weld reinforcement geometry on fatigue crack growth of butt welded joints

Shahani, A. R., Shakeri, I. & Rans, C. D., Oct 2020, In : International Journal of Fatigue. 139, 19 p., 105780.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Effect of ultrasonic welding process on the crystallinity at the welding interface of CF/PPS joints

Koutras, N., Villegas, I. F. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
73 Downloads (Pure)
Open Access
File
46 Downloads (Pure)

Enhanced Interface Adhesion by Novel Eco-Epoxy Adhesives Based on the Modified Tannic Acid on Al and CFRP Adherends

Tomić, N. Z., Saleh, M. N., de Freitas, S. T., Živković, A., Vuksanović, M., Poulis, J. A. & Marinković, A., 12 Jul 2020, In : Polymers. 12, 7, p. 1541 1 p., 1541.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
5 Downloads (Pure)

Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils

Quan, D., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A. & Benedictus, R., 15 Nov 2020, In : Composite Structures. 252, 112699.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Downloads (Pure)

Experimental and FEM analysis of mar behavior on amorphous polymers

Du, S., Hamdi, M. & Sue, H. J., 15 Mar 2020, In : Wear. 444-445, 12 p., 203155.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Fatigue crack growth of Al 5083-H111 subjected to mixed-mode loading

Shahani, A. R., Shakeri, I. & Rans, C. D., 1 Aug 2020, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42, 8, 12 p., 442.

Research output: Contribution to journalArticleScientificpeer-review

Fracture and fatigue behavior of carbon/epoxy laminates modified by nanofibers

Mohammadi, R., Najafabadi, M. A., Saghafi, H. & Zarouchas, D., Oct 2020, In : Composites Part A: Applied Science and Manufacturing. 137, 11 p., 106015.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT- and graphene nanoplatelet-doped thermoplastic veils

Quan, D., Mischo, C., Binsfeld, L., Ivankovic, A. & Murphy, N., 1 Mar 2020, In : Composite Structures. 235, 9 p., 111767.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Further studies into crack growth in additively manufactured materials

Iliopoulos, A. P., Jones, R., Michopoulos, J. G., Phan, N. & Rans, C., 1 May 2020, In : Materials. 13, 10, 18 p., 2223.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
8 Downloads (Pure)

High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis

Fotouhi, M., Jalalvand, M., Saeedifar, M., Xiao, B. & Wisnom, M. R., 2020, In : Composite Structures. 247, 10 p., 112444.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
11 Downloads (Pure)

Improving the adhesion strength of polymers: effect of surface treatments

Hamdi, M., Saleh, M. N. & Poulis, J. A., 1 Sep 2020, In : Journal of Adhesion Science and Technology. 34, 17, p. 1853-1870 18 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Influence of geometrical parameters on the strength of Hybrid CFRP-aluminium tubular adhesive joints

Lavalette, N. P., Bergsma, O. K., Zarouchas, D. & Benedictus, R., 15 May 2020, In : Composite Structures. 240, 112077.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
32 Downloads (Pure)
Open Access
File
2 Downloads (Pure)
Open Access
File
2 Citations (Scopus)
29 Downloads (Pure)

Light scattering and rheological effects in an optical fibre coupled nanoparticle suspension

Wang, X., Benedictus, R. & Groves, R. M., 2020, Optical Sensing and Detection VI. Berghmans, F. & Mignani, A. G. (eds.). SPIE, 11 p. 113540V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11354).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
1 Downloads (Pure)

Loading rate effects on mode-I delamination in glass/epoxy and glass/CNF/epoxy laminated composites

Ekhtiyari, A., Shokrieh, M. M. & Alderliesten, R., 1 Apr 2020, In : Engineering Fracture Mechanics. 228, 13 p., 106908.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
1 Citation (Scopus)
35 Downloads (Pure)

Mode-II fatigue response of AS4/8552 carbon/epoxy composite laminates interleaved by electrospun nanofibers

Mohammadi, R., Najafabadi, M. A., Saghafi, H. & Zarouchas, D., 1 Sep 2020, In : Thin-Walled Structures. 154, 12 p., 106811.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Mode-II fracture behaviour of aerospace-grade carbon fibre/epoxy composites interleaved with thermoplastic veils

Quan, D., Bologna, F., Scarselli, G., Ivanković, A. & Murphy, N., 3 May 2020, In : Composites Science and Technology. 191, 10 p., 108065.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Modeling and Simulating Human Fatality due to Quadrotor UAS Impact

Rattanagraikanakorn, B., Blom, H. A. P., Sharpanskykh, A., de Wagter, C., Jiang, C., Schuurman, M. J., Gransden, D. I. & Happee, R., 2020, AIAA Aviation Forum. 18 p. AIAA 2020-2902

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
6 Downloads (Pure)

Modelling head injury due to unmanned aircraft systems collision: Crash dummy vs human body

Rattanagraikanakorn, B., Schuurman, M., Gransden, D. I., Happee, R., De Wagter, C., Sharpanskykh, A. & Blom, H. A. P., 2020, (Accepted/In press) In : International Journal of Crashworthiness. 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Multi-spot ultrasonic welding of thermoplastic composite single-lap joints: Effect of spot spacing and number of spots on weld strength

Zhao, T., Tsakoniatis, I., Rans, C., Villegas, I. F. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
87 Downloads (Pure)
Open Access
File
5 Downloads (Pure)

Quantitative modeling of scratch behavior of amorphous polymers at elevated temperatures

Du, S., Mullins, M., Hamdi, M. & Sue, H. J., 27 May 2020, In : Polymer. 197, 11 p., 122504.

Research output: Contribution to journalArticleScientificpeer-review

Rapid surface activation of carbon fibre reinforced PEEK and PPS composites by high-power UV-irradiation for the adhesive joining of dissimilar materials

Quan, D., Deegan, B., Byrne, L., Scarselli, G., Ivanković, A. & Murphy, N., Oct 2020, In : Composites Part A: Applied Science and Manufacturing. 137, 11 p., 105976.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Downloads (Pure)

Role of adherend material on the fracture of bi-material composite bonded joints

Lopes Fernandes, R., Teixeira de Freitas, S., Budzik, M. K., Poulis, J. A. & Benedictus, R., 15 Nov 2020, In : Composite Structures. 252, 112643.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Downloads (Pure)

Scrutinizing interlaminar fatigue loading cycle in composites using acoustic emission technique: Stress ratio influence on damage formation

Ferreira Motta Junior, R., Alderliesten, R. C., Shiinoc, M. Y., Cioffia, M. O. H. & Voorwald, H. J. C., 2020, In : Composites Part A: Applied Science and Manufacturing. 138, 11 p., 106065.

Research output: Contribution to journalArticleScientificpeer-review

Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates

Quan, D., Alderliesten, R., Dransfeld, C., Tsakoniatis, I., Teixeira De Freitas, S., Scarselli, G., Murphy, N., Ivanković, A. & Benedictus, R., 20 Oct 2020, In : Composites Science and Technology. 199, 11 p., 108358.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Downloads (Pure)

Simulation of ultrasonic array inspection of composites with side drilled holes

Anand, C., Groves, R. M., Shroff, S. & Benedictus, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
68 Downloads (Pure)

Simulation of ultrasonic beam propagation from phased arrays in anisotropic media using linearly phased multi-Gaussian beams

Anand, C., Delrue, S., Jeong, H., Shroff, S., Groves, R. M. & Benedictus, R., 2020, In : IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 67, 1, p. 106-116 11 p., 8805119.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Spectra stitching for ultra-high resolution, low sensitivity decay and high-speed SD-OCT

Maria, M., Anisimov, A. G., Stols-Witlox, M. & Groves, R. M., 2020, Design and Quality for Biomedical Technologies XIII. Hwang, J. & Vargas, G. (eds.). SPIE, Vol. 11231. 9 p. 1123104. (Proceedings of SPIE).

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
25 Downloads (Pure)
Open Access
File
14 Downloads (Pure)

Stress analysis of double-lap bi-material joints bonded with thick adhesive

Saleh, M. N., Saeedifar, M., Zarouchas, D. & Freitas, S. T. D., 1 Mar 2020, In : International Journal of Adhesion and Adhesives. 97, 9 p., 102480.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
46 Downloads (Pure)

Surface pretreatments on CFRP and titanium for manufacturing adhesively bonded bi-material joints

Wang, W., Poulis, J. A., Teixeira De Freitas, S. & Zarouchas, D., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
70 Downloads (Pure)

Synergistic toughening and electrical functionalization of an epoxy using MWCNTs and silane- /plasma-activated basalt fibers

Quan, D., Moloney, P., Carolan, D., Abourayana, H., Ralph, C., Ivankovic, A., Dowling, D. & Murphy, N., 2020, In : Journal of Applied Polymer Science. 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Teaching Aerospace Structures and Materials to the World: Analysis of the edX MOOC Introduction to Aerospace Structures and Materials

Saunders, G., Rans, C., Teuwen, J., Sinke, J., Alderliesten, R. & van Valkenburg, W., 2020, AIAA Scitech 2020 Forum: 6-10 January 2020, Orlando, FL. American Institute of Aeronautics and Astronautics Inc. (AIAA), 10 p. AIAA 2020-0326

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Open Access
File
66 Downloads (Pure)

The effect of bond-line thickness on fatigue crack growth rate in adhesively bonded joints

Pascoe, J. A., Zavatta, N., Troiani, E. & Alderliesten, R. C., 15 Apr 2020, In : Engineering Fracture Mechanics. 229, 106959.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
29 Downloads (Pure)