If you made any changes in Pure these will be visible here soon.

Research Output

2020

3D printed titanium scaffolds with ordered TiO2 nanotubular surface and mesoporous bioactive glass for bone repair

Zhao, P., Liu, Y., Li, T., Zhou, Y., Leeflang, S., Chen, L., Wu, C., Zhou, J. & Huan, Z., 2020, In : Progress in Natural Science: materials international. 30, 4, p. 502-509

Research output: Contribution to journalArticleScientificpeer-review

Additively manufactured biodegradable porous zinc

Li, Y., Pavanram, P., Zhou, J., Lietaert, K., Taheri, P., Li, W., San, H., Leeflang, M. A., Mol, J. M. C., Jahr, H. & Zadpoor, A. A., 2020, In : Acta Biomaterialia. 101, p. 609-623

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

Additively manufactured functionally graded biodegradable porous zinc

Li, Y., Pavanram, P., Zhou, J., Lietaert, K., Bobbert, F. S. L., Kubo, Y., Leeflang, M. A., Jahr, H. & Zadpoor, A. A., 2020, In : Biomaterials Science. 8, 9, p. 2404-2419

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
13 Downloads (Pure)

Construction of three-dimensional extrusion limit diagram for magnesium alloy using artificial neural network and its validation

Bai, S., Fang, G. & Zhou, J., 2020, In : Journal of Materials Processing Technology. 275, 11 p., 116361.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Corrosion fatigue behavior of additively manufactured biodegradable porous zinc

Li, Y., Li, W., Bobbert, F. S. L., Lietaert, K., Dong, J. H., Leeflang, M. A., Zhou, J. & Zadpoor, A. A., 2020, In : Acta Biomaterialia. 106, p. 439-449

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
Open Access
File
12 Downloads (Pure)

Solvent-cast 3D printing of magnesium scaffolds

Dong, J., Li, Y., Lin, P., Leeflang, M. A., van Asperen, S., Yu, K., Tümer, N., Norder, B., Zadpoor, A. A. & Zhou, J., 2020, In : Acta Biomaterialia. 114, p. 497-514

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Downloads (Pure)
2019

Additively manufactured functionally graded biodegradable porous iron

Li, Y., Jahr, H., Pavanram, P., Bobbert, F., Paggi, U., Zhang, X. Y., Pouran, B., Leeflang, M. A., Weinans, H., Zhou, J. & Zadpoor, A. A., 2019, In : Acta Biomaterialia. 96, p. 646-661

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Biodegradation-affected fatigue behavior of additively manufactured porous magnesium

Li, Y., Jahr, H., Zhang, X. Y., Leeflang, M. A., Li, W., Pouran, B., Tichelaar, F. D., Weinans, H., Zhou, J. & Zadpoor, A. A., 2019, In : Additive Manufacturing . 28, p. 299-311

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Corrosion fatigue behavior of additively manufactured biodegradable porous iron

Li, Y., Lietaert, K., Li, W., Zhang, X. Y., Leeflang, M. A., Zhou, J. & Zadpoor, A. A., 2019, In : Corrosion Science. 156, p. 106-116

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Integrated physical and numerical simulations of weld seam formation during extrusion of magnesium alloy

Bai, S. W., Fang, G. & Zhou, J., 2019, In : Journal of Materials Processing Technology. 266, p. 82-95

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Investigation into the Extrudability of a New Mg-Al-Zn-RE Alloy with Large Amounts of Alloying Elements

Bai, S. W., Fang, G. & Zhou, J., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 7, p. 3246-3264

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
7 Downloads (Pure)

Modeling high temperature deformation characteristics of AA7020 aluminum alloy using substructure-based constitutive equations and mesh-free approximation method

Eivani, A. R., Vafaeenezhad, H., Nikan, O. & Zhou, J., 2019, In : Mechanics of Materials. 129, p. 104-112

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials

Zhang, X. Y., Fang, G., Leeflang, S., Zadpoor, A. A. & Zhou, J., 2019, In : Acta Biomaterialia. 84, p. 437-452

Research output: Contribution to journalArticleScientificpeer-review

44 Citations (Scopus)
2018

A comprehensive investigation of the strengthening effects of dislocations, texture and low and high angle grain boundaries in ultrafine grained AA6063 aluminum alloy

Najafi, S., Eivani, A. R., Samaee, M., Jafarian, H. R. & Zhou, J., 2018, In : Materials Characterization. 136, p. 60-68

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
11 Citations (Scopus)
14 Downloads (Pure)

Additively manufactured biodegradable porous iron

Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., Mol, J. M. C., Zhou, J. & Zadpoor, A. A., 2018, In : Acta Biomaterialia. 77, p. 380-393

Research output: Contribution to journalArticleScientificpeer-review

50 Citations (Scopus)

Bioactive tricalcium silicate/alginate composite bone cements with enhanced physicochemical properties

Xu, C., Wang, X., Zhou, J., Huan, Z. & Chang, J., 2018, In : Journal of Biomedical Materials Research. Part B: Applied Biomaterials. 106, 1, p. 237-244

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)

Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering

Zhang, X. Y., Fang, G., Xing, L. L., Liu, W. & Zhou, J., 2018, In : Materials and Design. 157, p. 523-538

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
25 Citations (Scopus)
1 Downloads (Pure)
41 Citations (Scopus)

Improvement of mechanical performance of bioresorbable magnesium alloy coronary artery stents through stent pattern redesign

Wang, Q., Fang, G., Zhao, Y. H. & Zhou, J., 2018, In : Applied Sciences (Switzerland). 8, 12, 22 p., 2461.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
22 Downloads (Pure)

In vitro characterization of ZM21 mini-tube used for biodegradable metallic stent

Bian, D., Jiang, J., Zhou, W., Li, N., Zheng, Y., Leeflang, S. & Zhou, J., 2018, In : Materials Letters. 211, p. 261-265

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)
2017

Additively manufactured biodegradable porous magnesium

Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K. U., Mol, J. M. C., Weinans, H., Jahr, H. & Zadpoor, A. A., 2017, In : Acta Biomaterialia. 67 ( Febr. 2018), p. 378-392

Research output: Contribution to journalArticleScientificpeer-review

81 Citations (Scopus)

Additively manufactured scaffolds for bone tissue engineering and the prediction of their mechanical behavior: A review

Zhang, X. Y., Fang, G. & Zhou, J., 2017, In : Materials. 10, 1, 28 p., 50.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
59 Citations (Scopus)
63 Downloads (Pure)
Open Access
File
15 Citations (Scopus)
41 Downloads (Pure)

Analysis of the bonding strength and microstructure of AA6082 extrusion weld seams formed during physical simulation

Bai, S. W., Fang, G. & Zhou, J., 2017, In : Journal of Materials Processing Technology. 250, p. 109-120

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
12 Citations (Scopus)
15 Downloads (Pure)
Open Access
File
6 Citations (Scopus)
31 Downloads (Pure)
9 Citations (Scopus)
16 Citations (Scopus)
Open Access
File
22 Citations (Scopus)
25 Downloads (Pure)

In vitro degradation and surface bioactivity of iron-matrix composites containing silicate-based bioceramic

Wang, S., Xu, Y., Zhou, J., Li, H., Chang, J. & Huan, Z., 2017, In : Bioactive Materials. 2, 1, p. 10-18

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
11 Citations (Scopus)
52 Downloads (Pure)

Mesoporous bioactive glass functionalized 3D Ti-6Al-4V scaffolds with improved surface bioactivity

Ye, X., Leeflang, S., Wu, C., Chang, J., Zhou, J. & Huan, Z., 2017, In : Materials. 10, 11, 14 p., 1244.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
9 Citations (Scopus)
29 Downloads (Pure)

Physical simulation method for the investigation of weld seam formation during the extrusion of aluminum alloys

Fang, G., Nguyen, D. T. & Zhou, J., 2017, In : JOM. 69, 4, p. 734-741

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
13 Downloads (Pure)

Study on the Mg-Li-Zn ternary alloy system with improved mechanical properties, good degradation performance and different responses to cells

Liu, Y., Wu, Y., Bian, D., Gao, S., Leeflang, S., Guo, H., Zheng, Y. & Zhou, J., 2017, In : Acta Biomaterialia. 62, p. 418-433

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
30 Citations (Scopus)
17 Downloads (Pure)
2016

An investigation on the properties of injection-molded pure iron potentially for biodegradable stent application

Mariot, P., Leeflang, MA., Schaeffer, L. & Zhou, J., 2016, In : Powder Technology. 294, p. 226-235

Research output: Contribution to journalArticleScientificpeer-review

Open Access
12 Citations (Scopus)

Characterization of the porous structures of the green body and sintered biomedical titanium scaffolds with micro-computed tomography

Arifvianto, B., Leeflang, S. & Zhou, J., 2016, In : Materials Characterization. 121, p. 48-60

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Mechanism of the formation of peripheral coarse grain structure in hot extrusion of Al-4.5Zn-1Mg

Eivani, AR., Zhou, J. & Duszczyk, J., 2016, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 96, 12, p. 1188 - 1196

Research output: Contribution to journalArticleScientificpeer-review

Open Access
8 Citations (Scopus)

Optimization of interpass annealing for a minimum recrystallized grain size and further grain refinement towards nanostructured AA6063 during equal channel angular pressing

Shadabroo, MS., Eivani, AR., Jafarian, HR., Razavi, SF. & Zhou, J., 2016, In : Materials Characterization. 112, p. 160-168

Research output: Contribution to journalArticleScientificpeer-review

Open Access
16 Citations (Scopus)

Simultaneous improvements of the strength and ductility of fine-grained AA6063 alloy with increasing number of ECAP passes

Samaee, M., Najafi, S., Eivani, A. R., Jafarian, H. R. & Zhou, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 669, p. 350-357 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
40 Citations (Scopus)
21 Downloads (Pure)

Substantial enhancement of corrosion resistance and bioactivity of magnesium by incorporating calcium silicate particles

Huan, Z., Xu, C., Ma, B., Zhou, J. & Chang, J., 2016, In : RSC Advances. 6, 53, p. 47897-47906

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)
2015

A modelling framework for the prediction of peripheral coarse grain structure formed during the hot extrusion of aluminium alloys.

Eivani, AR., Duszczyk, J. & Zhou, J., 2015, Proceedings 9th International Congress Aluminium Two Thousand and the 5th International Conference on Extrusion and Benchmark. Modena, Italy: Interall, 10 p.

Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Analysis of the densification behaviour of titanium/carbamide powder mixtures in the preparation of biomedical titanium scaffolds.

Arifvianto, B., Leeflang, S. & Zhou, J., 2015, p. 75 - 76.

Research output: Contribution to conferencePosterScientific

Constitutive behavior and microstructure evolution of the as-extruded AE21 magnesium alloy during hot compression testing

Wang, L. X., Fang, G., Leeflang, MA., Duszczyk, J. & Zhou, J., 2015, In : Journal of Alloys and Compounds. 622, p. 121-129 9 p.

Research output: Contribution to journalArticleScientificpeer-review

32 Citations (Scopus)

Evolution of macro- and micro-pores in the porous structures of biomedical titanium scaffolds during isothermal sintering

Arifvianto, B., Leeflang, S. & Zhou, J., 2015, p. 164 - 164.

Research output: Contribution to conferenceAbstractScientific

In vitro degradation of magnesium metal matrix composites containing bredigite

Naddaf Dezfuli, S., Leeflang, S. & Zhou, J., 2015, p. 193 - 195.

Research output: Contribution to conferenceAbstractScientific

The compression behaviors of titanium/carbamide powder mixtures in the preparation of biomedical titanium scaffolds with the space holder method

Arifvianto, B., Leeflang, MA. & Zhou, J., 2015, In : Powder Technology. 284, p. 112-121 10 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)
2014

A new technique for the characterization of the water leaching behavior of space holding particles in the preparation of biomedical titanium scaffolds

Arifvianto, B., Leeflang, MA. & Zhou, J., 2014, In : Materials Letters. 120, p. 204-207 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
7 Citations (Scopus)

Characterisation of space holder removal through water leaching for preparation of biomedical titanium scaffolds

Arifvianto, B., Leeflang, S., Duszczyk, J. & Zhou, J., 2014, In : Powder Metallurgy. 57, 1, p. 9-12

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

China’s recent moves towards a sustainable and balanced aluminium industry

Zhou, J., 2014, In : International Aluminium Journal. 90, 6, p. 26-33

Research output: Contribution to journalArticleProfessional